A-bungalow 15

You can park your car next to Bungalow 16.

• You can adjust the temperature as desired using the "-" and "+" buttons.
• When you set the temperature, you will see (as long as the "C" symbol is flashing) the set temperature.
• Then the current temperature in the room will be displayed.
• As long as you are present, the temperature will be maintained.
• When you leave the room, the temperature will automatically go to a (lower) resting temperature to save energy.
• You activate the thermostat again upon entering the room by touching the "-" and "+" buttons.

• The induction hob consumes a lot of power, do not turn on all the hobs at the same time on the highest setting (setting 9).
• Do not turn on all electrical appliances at the same time (coffee maker, kettle, induction etc.). 
• There is a child lock on the induction hob, which is the key on the plate. If a drop of moisture or anything else falls on it, the cooktop can shut off. Then press the key for 5 seconds and the induction switches on again.

Hot Air

• Turn the multi-function button to the Forced Air position.
• Turn the +/- knob to set the temperature
• Press the Select button to select the time.
• Turn the +/- button to set the cooking time
• Press the start button
• During the heating process, the numbers flash until the set temperature is reached
• When the heating process has started, the temperature can easily be set by turning the multifunction knob

The default setting for the Forced Air selection is 175 degrees.

Note: If the cooking time is set to more than 90 minutes, the display will show 'CONT'. This means that the grill will remain on continuously, with no time limit, until you turn the oven off.

Microwave and hot air function

• Turn the multifunction knob to the Forced Air position.
• Turn the +/- knob to set the temperature
• Press the Select button to select the microwave power level.
• Turn the +/- knob to set the power level
• Press the SELECT button to select the time.
• Turn the +/- button to set the time
• Press the start button
• During the heating process, the numbers flash until the set temperature is reached
• Once the heating process has started, the temperature can be easily set by turning the multifunction knob. The power level of the microwave can also be changed. The maximum possible power level of the microwave when using the hot air function is limited by a factory setting. 

Turbo Grill Combi

• Turn the multi-function button to the grill position
• Turn the +/- knob to set the power level
• Press the selector button to choose the cooking time
• Turn the +/- knob to set the cooking time
• Press the start button
• The maximum possible power level of the microwave when using the Turbo grill is limited by a factory setting.